Label Specifications

LTO

IBM - StorageTek - Exabyte - ADIC - All non-dual barcode
Netc Product Code LTO-01, LTO-02, LTO-04, LTO-11, LTO-12, LTO-18 and LTO-ADIC.
Samples can be viewed on the LTO Samples page.

Barcode Height:

11mm

Leading & Trailing Quiet Zones:

4.5mm

Human Readable:

Not trimmed by the label die cut

HP - All dual barcode
Netc Product Code LTO-03 and LTO-13. Samples can be viewed on the LTO Samples page.

Barcode Height:

4.5mm (large barcode)

Leading & Trailing Quiet Zones:

4.5mm

Human Readable:

Regarding the sentence “The edge of label towards hub of tape”, it’s OK for the ‘g’ and ‘p’ to have their descent (the portion that is printed below the baseline) cut off.

DLT

StorageTek (STK)
Netc Product Code DLT-01 & DLT-20. Samples can be viewed on the DLT Samples page.

Barcode Height:

13mm

Leading & Trailing Quiet Zones:

2.4mm

Human Readable:

Try and leave 1mm of white space between the human readable potion of the label and the die cut. This is so when the label is inserted into the cartridge none of the human readable portion will be blocked from view.

Misc: The black lines at each end of the label can touch the die cut. If one of the black lines is completely cut off there will not be enough quiet zone at that end.

ATL / Sun - Compaq
Netc Product Code DLT-11. Samples can be viewed on the DLT Samples page.

Barcode Height:

None should be off the label.

Leading & Trailing Quiet Zones:

4mm

Human Readable:

Try and leave at least 1mm between the die cut and the top of the human readable characters. This is so when the label is inserted into the cartridge none of the human readable portion will be blocked from view. If the bottom horizontal line rests on the die cut there will be enough room at the top.

ADIC
Netc Product Code DLT-06. Samples can be viewed on the DLT Samples page.

Barcode Height:

11mm

Leading & Trailing Quiet Zones:

5.25mm (+/-.25mm)

Human Readable:

Try and leave at least 1mm between the die cut and the top of the human readable characters. This is so when the label is inserted into the cartridge none of the human readable portion will be blocked from view

1/2” Styles

3480 / 3590 / 9840 Styles
Samples can be viewed on the 3480 Samples page.

Barcode Height:

4mm

Leading & Trailing Quiet Zones:

2.5mm

Human Readable:

The die cut should not cut off ANY of the characters.

3592 Style
Samples can be viewed on the 3480 Samples page.

Barcode Height:

7mm

Leading & Trailing Quiet Zones:

5mm

Human Readable:

The die cut should not cut off ANY of the characters

AIT

Samples can be viewed on the AIT Samples page.

Barcode Height:

6.25mm

Leading & Trailing Quiet Zones:

5mm

Human Readable:

Do not print any of the characters on the die cut.

4MM

Samples can be viewed on the 4mm Samples page.

Barcode Height:

3.25mm

Leading & Trailing Quiet Zones:

5mm

Human Readable:

Do not print any of the characters on the die cut.

8MM

Samples can be viewed on the 8mm Samples page.

Barcode Height:

6.25mm

Leading & Trailing Quiet Zones:

7.5mm

Human Readable:

Do not print any of the characters on the die cut.